battery supply for electric bicycle Shenzhen Zhifu New Energy Co., Ltd. , https://www.sunbeambattery.com
Tmall M11 Stone ROM came out and I was eager to go home to open the brush! As the stone brush tutorial given by the official is only used to express the text, here I use graphics to describe the installation process in detail, but also easy to refer to the oil! Do not talk nonsense, open brush it!
First must disconnect the external network connection, but do not cut off the route, after all, the route is the bridge between the computer and the M11 and then restore the factory settings, there is no need to pick up the PP, directly inside the settings can be restored to the factory 
Ha ha! The long-lost picture finally came out, 3.0 UI is really disgusting 
Then set up the DNS 
Turn on remote debugging 
Make sure the WIFI is in the same network segment as the computer. Open the computer and start operating!
Follow the prompts to enter the M11's IP address 
According to the computer tips, press C to continue the connection after a successful connection 
This prompt will appear on the TV later. 
You will be prompted to install this file later. This prompt is relatively long. In fact, it is a stone UI. Remote point will continue to be installed. 
After installation, in fact, there is no prompt, open my application 
See the stone UI not? Description has been installed successfully, press the home button on the remote control, back to the home page! Then press Enter on the computer to continue until the end of the screen 
Haha! The familiar interface came out... 
It is highly recommended that you do not install the program for the first time after you finish the brushing. First turn the M11 off and off and then turn it on. This may cause a lot of unnecessary troubles. This tutorial is over!
First of all, I would like to thank the Stone Team for giving us a new experience, an opportunity to get rid of the limitations of the original ROM. Thank you very much for your achievements!
June 12, 2024