Model NO.: 5TE
Standard: VDE
Certification: UL, VDE, PSE, KC, CQC
Trademark: XC Fuse
Transport Package: Carton
Specification: 8.4*7.2*4
Origin: China
HS Code: 85361000
Model: 5TE
Size: 8.4*7.2*4mm
Slow blow or time delay
Certificaitons: cULus VDE CQC PSE KC

 Functional  Characteristics
(Subject to product acknowledgement)
Micro Fuse, 5TE, 8.4*7.2*4mm, Slow blow Fuse with UL VDE PSE KC Certification


  Approvals
Micro Fuse, 5TE, 8.4*7.2*4mm, Slow blow Fuse with UL VDE PSE KC Certification


Company profile
XC Electronics(Shenzhen) Co., Ltd. was founded in 1996, located in Shenzhen, China. We produce and sale a full range of fuse tubes, blade fuses, fuse holders, KSD series thermostats, Car thermostats and ect.
  We have a factory area of 15000 square meters, more than 600 employees, and all kinds of production testing equipments, annual production capacity reach 1.5 billion pieces. The company passed the ISO9001:2000 quality system certification in 2004, and has got the "CCC", "CQC", "TUV", "VDE", "UL", "UR", "CSA", "PSE", "KC" product safety certifications. At the same time we meet the requirements of RoHS, we passed the TS16949 certification in 2009, passed the ISO14000 certification in 2011 and accessed national high-tech enterprise certification in 2013.
  Since the establishment of company, we have established long-term cooperation relationships with many famous enterprises, such as Samsung, ACBEL, Glanze, Greatwall, Hisense, LG, Mideal, Motorala, Panasonic, Philips, ROHM, Skyworth, Bosch, etc. 

Factory photo
Micro Fuse, 5TE, 8.4*7.2*4mm, Slow blow Fuse with UL VDE PSE KC Certification

Production workshop
Micro Fuse, 5TE, 8.4*7.2*4mm, Slow blow Fuse with UL VDE PSE KC Certification


VDE Registered Manufacturer's Laboratory
Micro Fuse, 5TE, 8.4*7.2*4mm, Slow blow Fuse with UL VDE PSE KC Certification
Micro Fuse, 5TE, 8.4*7.2*4mm, Slow blow Fuse with UL VDE PSE KC Certification


 

4.2mm Wire To Board Connectors

4.2mm Wire To Board Connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.


4.2 mm pitch connectors wire to board connectors

Fully isolated terminals, positive locking housings, low-engagement forces and polarized housings, also offers blind mating, TPA and higher current options. Pitch 4.20mm

4.2 mm pitch connectors wire to board connectors Including:
male housing
Male housing of connector, UL94V-0 and UL94V-2, hanging and panel mount, single row and dual row, 2 to 24 circuits.

Female housing
Female housing of connector, with locking latch in order to avoid loosing, and with polarity in order to avoid dis-mating. One row and dual rows, from 2 circuits to 24 circuits.

Terminal
The conductor of connector, brass or phosphor bronze, tin plated over nickel, selective gold plated as customer's requirement.


Header
Header, right angle and vertical , with peg and without peg, DIP soldering, single row and dual row, 2 to 24 circuits.

4.2 mm connectors wire to board connectors General Specification:
Current rating: 6A AC, DC.(AWG#18)
Voltage Rating: 600V AC,DC
Withstanding Voltage: 1500V AC/minute.
Insulation resistance: 1000MΩ min
Contact resistance: Initial Value/ 10mΩ max
Temperature rise: -40'C ~ 105'C.

Circuit Board Connectors,4.2Mm Wire To Board Connectors,4.2Mm Pcb Wire To Board Connector,4.2Mm Pin Wire To Board Connector,.165" Wire To Board Connectors,4.2mm Power Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com

June 02, 2024