1. United States American lamp/holder standard ANSI C81.61 & 81.62 adds G6.6 cap/lamp holder On February 10, 2017, the American National Standards Institute (ANSI) updated the standard ANSI C81.61 and C81.62, adding the G6.6 cap/lamp holder to the new ANSI standard cap/lamp holder. G6.6 lamp holder/lamp holder is a lamp holder and lamp holder specially designed for LED T-tube, which fundamentally solves the safety problem that LED light source is confused with traditional light source, and will become the safety guarantee of LED lighting. The LED tube of G6.6 lamp holder/lamp holder has one end of the power supply end and the other end only for physical support, just like the current principle of TYPE B single-ended power supply LED tube. G6.6 lamp holder/lamp holders are equipped with three pins L, N, G. If the metal housing of the new G6.6 standard lamp holder is used, it is not necessary to use double-insulated electrical structure. Directly use "lamp grounding + basic insulation" "Meet the standard requirements." See the G6.6 base structure diagram in ANSI C 81.61 below, and the G6.6 base block diagram in ANSI C 81.62: G6.6 lamp / lamp holder advantages. Figure 1: G6.6 lamp head standard for ANSI C 81.61 1. It is completely incompatible with the lamp head size of the traditional light source. It is assembled with a sleeve type buckle, and the Pin pin is not easily touched. 2. Can withstand a larger tube weight, currently defined in the ANSI recommendations for a maximum of 1000g. The effect of using a G6.6 cap/lamp holder. Figure 2: G6.6 lampholder structure diagram of ANSI C 81.62 Lamp holder manufacturer G6.6 lamp holder, the evaluation standard is UL 8754 (Solid-state Lighting Bases, Holders and Connectors for LED engines and modules) is applied for the North American finished lamp holder Listed certification. 2. LED tube manufacturer Listed LED tubes with G6.6 caps, the evaluation standard is UL1993 (Self-Ballasted Lamps and Lamp Adapters) applied for Listed certification of North American finished light sources. 3. Refurbishment kit (RETROFIT) manufacturer Retrofit kit with G6.6 lamp holder, the evaluation standard is UL 1598C (Light-Emitting Diode (LED) Retrofit Luminaire Conversion Kits), and the North American Refurbished Kit is classified. 4. Lamp manufacturer The type of lamp holder used in the UL1598 luminaire has been added. The luminaire manufacturer can apply the GCE new lamp holder to the finished luminaire for North American certification. Technical experts recommend: The traditional LED Type B lamp, which was previously only available as a retrofit kit Retrofit Kit (UL1598C+UL1993, Classified grading certification) for export to the North American market, now has an additional certification scheme that can be used directly as a whole with the G6.6 new ANSI standard lamp holder. LED light source (UL1993, Listed finished product certification) entered the North American market! 2, Brazil The display will force the certification of INMETRO Brazil will regulate image tube TVs, LCD TVs, plasma TVs, LED TVs, and TV-enabled displays (excluding all-in-one computers) in size from 13-65 inches. Imported or locally produced TVs will be required to meet the requirements for safety, electromagnetic compatibility and energy consumption, obtain the INMETRO certificate and register. At the same time, such products will be regulated by the market. ※ INMETRO regulations: 1. Main regulations: Ordinance no. 563/2014 2. Basic norms: Ordinance no. 649/2012 3. Test related: Ordinance no. 427/2014 ※ Relevant implementation time schedule: From October 1st, 2017: All imported and domestically produced products are beginning to be regulated. From April 1st, 2018: Manufacturers and importers may not sell uncertified products to wholesalers. From October 1st, 2018: Products that have not obtained a certificate can not be sold (zero) to consumers. 3. India GMAP Regulatory Update - India's BIS plans to expand 13 categories of products into the BIS mandatory directory list. Following the issuance of 30 mandatory registration requirements for electronic and information products by the Ministry of Electronics and Information, the following products will be announced on August 16, 2017 for inclusion in the BIS mandatory registration program. The announcement has a transition period of six months; the expected enforcement date is February 16, 2018. New list of regulated products: 4. South Africa NRCS revised mandatory regulations for electrical and electronic equipment VC 8055 ※ Simplify the product definition of this specification (Part 1): All electrical and electronic equipment with a voltage not exceeding 600 Vac or Vdc. ※ Add new control products and remove some products that are subject to other regulations. A. New: 1.) Adoption of IEC/SANS 62368 for audio and video and information products 2.) The uninterruptible power system (UPS) must comply with SANS/IEC 62040-1 3.) Power transformers, power supply units and similar products are required to comply with SANS/IEC 61558-1 4.) Power converters for solar systems need to comply with SANS/IEC 62109 B. Removal: luminaires, hand-held power tools, portable power tools. ※ The basic requirements are added in the third chapter. ※ Modify the description of some requirements. ※ Relevant implementation date: a.) Expected effective date: September 8, 2017 b.) Expected Force Day: March 28, 2018 Wall switch and socket ,Champagne wall switch and socket, 16A push switch and socket Guangdong Shunde Langzhi Trading CO., Ltd , https://www.langzhielectrical.com
November 19, 2022