The brief production process of the optical stereo word and the logo is as follows: 1. Firstly process the aluminum profile, stainless steel or iron sheet into a groove type—the pattern of the logo or logo. The iron sheet is also processed by spraying and baking, and the depth of the groove is generally 8cm-12cm; 2. Connect the LED light source module with the connecting wire, and then fix it with silicone or fixing screws (you can fix the position with double-sided tape first), and fix the LED light source module on the inner bottom surface of the groove word. After mirror treatment, such as applying white reflective paint and affixing a brightness enhancement film, this can improve the condensing property and increase the reflection coefficient). 3. The number of LED light source modules depends on several factors: special characters, fonts, fonts, word size (size), stroke width, groove depth, reflection coefficient inside the groove, and illumination brightness. 4. Finally, with the self-tapping screws, the three-dimensional characters on the aluminum-plastic strips, acrylic sheets or organic sheets should be fastened and nailed, and installed in the required place. Connect the transformer to the appropriate voltage to turn it on. In this way, the illuminated stereo word or the logo is completed. Acrylic process is used to form three-dimensional luminous characters. During the day, it is simple, bright, and three-dimensional. It is vigorous and vigorous. At night, the graphics and backgrounds work together, the colors are colorful and varied, and the graphics are rich. Since AC power cord is output of high voltage electric power, there is a risk of electric shock injury, therefore, All the AC power cord must comply with safety standard to produce. AC (Alternating Current) Power cord is to transmit high voltage. It is used to drive machinery or home appliances. AC Power cord,power cable, batter cable, power cord ETOP WIREHARNESS LIMITED , https://www.wireharnessetop.com
March 10, 2024