UFO 48V 150Ah Powerwall uses lithium iron phosphate (LFP) battery chemistry. It contains a 150 amp hour battery operating at 48 volt, which offers a power capacity of 7.2kWh. This UFO LiFePO4 Battery Pack is an safe and reliable power solution for house and office use. It provides energy for application such as peak load shifting, backup power system and enjoy a self sufficient home of power supply.
Can be equipped with UFO Self-developed Communication Protocols Conversion Module, which provides compatibility with 10 popular solar inverters on the market.
48V 150Ah Powerwall,48V Wall Mounted Battery,Powerwall Energy Battery Storage,Powerwall Battery Specs ShenZhen UFO Power Technology Co., Ltd. , https://www.ufobattery.com
Wall Mounted LiFePO4 battery Features
â— Wide Compatibility
â—Real-time Battery Monitoring
The UFO Powerwall is equipped with LCD Display Screen, making LiFePO4 battery status checking easily.
â—Easy and Quick Installation
Each Powerwall battery is equipped with battery bracket and screws for easy installation.
1. The packaging protection of the LED flexible light bar is not perfect, resulting in damage to the lamp bead during transportation.
2. The soldering point of the LED flexible strip has a virtual soldering phenomenon, and the vibration during the transportation causes the solder joint to fall off and the light strip is not bright.
3, LED flexible light bar with less solder, the solder joints are easy to fall off
4, LED flexible light bar solder quality is not good, LED flexible light bar in the bending process, the solder joint is prone to brittle fracture, shedding phenomenon
5. When the LED flexible light bar is installed, the bending angle is too large, which causes the LED flexible light bar solder joint to be separated from the copper foil and causes no light.
6. Excessive extrusion of the product when the LED flexible strip is installed, resulting in damage to the LED flexible strip chip or deformation of the solder joint without falling
7. The solder resist layer of the LED flexible strip circuit board is too thick. The solder and the circuit board cannot be completely fused together during soldering, which is also a phenomenon of solder joint.
8. The LED flexible strip can not be twisted during installation. If it is distorted, the solder joint of the LED flexible strip will fall off and cause no light.
February 22, 2024