There are three functional areas in the bathroom, such as sink, toilet and shower area. The bathroom should be bright and soft, and the lamps should have the function of moisture and rust, and then different in different functional areas. Lighting layout.
How to configure the lighting of the bathroom bathroom
The lighting design of the sink is quite diverse, but it is mainly based on outstanding functionality. A spotlight or mirror headlight (indication 3) can be installed above and around the mirror for easy grooming, makeup or shaving. Two wall lights (indication 4) can be installed to provide auxiliary lighting and also a decoration.
The impression in the shower room or bathtub is that the humidity is large and dark, so it is advisable to use bright and soft lighting. The lighting can be used in various forms, or by the light from the ceiling, or in low places. Light creates a warm and relaxing atmosphere, or use a backlight as shown (indication 5).
In the toilet area, the light should also be bright and soft.
In general, the space should have a rich level, the main light (indication 1), backlight (indication 2, 5), general lighting (indication 3) and auxiliary lighting (indication 4) should be organically matched to create a comfortable surroundings.

510 Cartridge

·Basic precautions

Do not put expensive oil into low-quality cartridges to avoid wastage. Most pre-filled oil cartridges have the so-called 510 thread. The oil cartridge screws onto a rechargeable battery. Some of these batteries have buttons and some heat up automatically when you pump the oil. Some batteries have multiple temperature settings and some heat up to a preset temperature; these features need to be known in advance.

·Cleaning notes

Use a suitable cleaning tool to clean them, such as activated charcoal or dried tea leaves in a used pipe to absorb the oil. It is important not to use alcohol or other boiling water to clean the pipe, and to wait until it has cooled down completely before cleaning. Otherwise, the hot stem will come into contact with the watery liquid and cause the mouthpiece tenon to loosen, thus shortening the life of the 510 cartridges.

This is what you should be aware of when using 510 cartridges. At the same time, when using 510 cartridges, there are still some vaping tips, for example, when using them, be careful not to suck too hard, will not produce smoke. When you inhale too hard, the smoke is sucked directly into your mouth and not atomized by the atomizer, so gently inhaling is more powerful and gives you a better vaping experience.

510 Cartridge Oem,Leakproof 510 Cartridge,510 Battery And Cartridges Oem,510 Cartridge

Shenzhen MASON VAP Technology Co., Ltd. , https://www.masonvap.com