A seemingly simple design, in fact, full of the efforts of several engineers and day and night, this design needs to undergo rigorous and repeated evaluation, before it can be launched on the market. TI Designs reference design library, sincerely for you to create a classic! Looking for more reference designs? Go to the TI Designs reference design library and have the design you want! TI Designs Design Library will introduce a series of reference design selections, including industrial, medical, automotive electronics, factory automation and control, building automation, personal electronics and other applications, updated weekly, don't miss it! Now, let's take a look at the second recommendation of "Automotive Electronic Reference Design", what good recommendation! To learn more, click here for the original introduction to this reference design. This reference design provides a compact power solution for the ApTIna AR0132 image sensor in automotive camera modules. The design comes with a power board and filter board with two synchronous buck regulators that provide 1.8V and 2.8V outputs. Design system block diagram (click here to download the complete block diagram) >>Learn more  Design features: Image Quality - Includes output filters to cover core, analog, I/O voltage rails and ensures high image quality Small size - 20 x 20 cm Application note - 4.5-50V operating input voltage range, ideal for 12V car batteries - Use filter board to configure transmission power and FPD-Link III signals via coaxial cable >>Learn more   Design documentation (click to download full design resources) >>Learn more   Core design device: model description Related documents Free sample LM34919C-Q1 Ultra-small wide input voltage 600mA step-down converter for space-constrained applications TPS62231 3MHz Ultra-Small Buck Converter in 1x1.5 SON Package >>Learn more Design demonstration: Related design recommendations: Reference Design 1: Power and Serializer Reference Design for Automotive Camera Modules Description: A compact power and serializer solution for automotive auxiliary camera modules using the OmniVision image sensor OV10635. Reference Design 2: AptinaTM Car Camera Module Description: Automotive camera module solution with Aptina image sensor and processor and TI FPD-Link III serializer. This combination provides a compact two-board automotive camera solution. Only one coaxial cable is required for camera data/control signal transmission and input power. Fire Resistant Network Cable is the most commonly used twisted-pair cable flame retardant grade, its test standard is UL 1581.
If you burn it, you release a lot of heat.According to the code of construction for integrated wiring, twisted pair wires shall be laid through metal pipes and behind metal Bridges in floors, ceilings and walls.In this case, the use of ordinary twisted-pair wire can be installed in any situation without concern for smoke and toxicity.
Fire Resistant Electrical Wire,Fire Resistant Network Cable,Fire Resistant Cat6 Cable,Fire Resistant Electrical Cable Shenzhen Kingwire Electronics Co., Ltd. , https://www.kingwires.com![[Automotive Electronic Reference Design Selection - 2] Power Solution for Image Sensors in Automotive Camera Modules](http://i.bosscdn.com/blog/05/04/12/Q40_0.png)
![[Automotive Electronic Reference Design Selection - 2] Power Solution for Image Sensors in Automotive Camera Modules](http://i.bosscdn.com/blog/05/02/12/3S5_0.png)
![[Automotive Electronic Reference Design Selection - 2] Power Solution for Image Sensors in Automotive Camera Modules](http://i.bosscdn.com/blog/05/02/01/9563_0.png)
So the CM level cable fire characteristic is as follows: not spontaneous combustion; In the flame will smoke, and may appear flame; The speed of flame spread along the cable is very slow; When the external fire source is cut off, the fire on the cable will gradually go out.
CM class cables do not take into account smoke density and toxicity (no mention of smoke density and toxicity in UL 1581) as long as they meet flame retardant rating requirements.Cm-level cables are mostly horizontal twisted-pair and are used in wiring subsystems.The sheath layer of CM class cable is mostly PVC material, while the insulation layer is high-density PE material.The advantage is that it is cheap, while the disadvantage is that the ignition point is low, the normal operating temperature is below 70℃, when the temperature reaches 160℃ or higher, THE PVC material will emit toxic halogen and smoke.
September 04, 2022