The figure shows that the circuit load sensor (LSE for LSE) for LSE non-empty inverter is a sensitive device for monitoring the load on and off of the output of the power supply. Domestic manufacturers have developed three series. Load sensor products, ie I series universal type (the manufacturer's design idea is specifically used for energy-saving transmitters in inverters); II series is dedicated to voltage regulator equipment; III series is DC load sensors (manufacturer's The design idea is mainly used for sensors for energy saving and protection in the recorder. This article only introduces the application principle, basic electrical parameters and related precautions of the I series load sensor LSE, together with some newly developed application circuits, to the majority of electronic enthusiasts.
Function description
The socket is ordinary converter,with
two output 5V2A power USB power supply at the same time,can be very
convenient in use electrical appliances and recharge the equipment at
the same time,such as digital products like Iphone Ipad,MP3,MP4 etc.The
charge apply to full range of international AC output,no-load power
consumption less than 0.3W,with short circuit,overload,over-voltage
protection,can be convenient for your life and save more energy
Timer Control Time Adgustment
1.Press the power switch 1 time,the 1HOUR LED will light on.The Timer into ON mode,USB and control socket output ON .
2.Continuously press the power switch
the LED light on,the Countdown mode and LED light on will cycle change
from 1HR,2HR,4HR,6HR,8HR,10HR.
3.Choose you need countdown time
mode,the mode LED will lighto on,start countdown until countdown time
finish,the control output and USB change to OFF
4.Then the countdown is start,The Time indicate LED will from high to low auto change until Countdown finish off.
Failure analysis:
1.check whether the power supply connection is good
2.check whether the USB cable is loosen
Warning Note:
1.Use indoor and dry location ONLY
2.The load max does not exceed 15A 3600W
3.This product does not convert voltage please do not miss use DO NOT exceed the maximum loading of 3600 Watts 15A
4.Always have earth connection for safety reason
5.If in doubt please consult with a qualified electrician
USB Charger Socket, Fast Charge USB Wall Socket, USB Plug Socket, USB Socket Charger, Socket USB charger NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com
Inverter is the conversion of DC power (battery, storage battery) into alternating current (typically 220v50HZ sine or square wave).
November 29, 2024