In different countries, the willingness to implement automation in different scenarios is different. The only certainty is that everyone does not like parking, not to mention parking spaces and parking. This is the most urgent need in the entire car intelligent and automatic driving, and it is also an easy to cut. Automatic parking, also known as automatic parking, is a very convenient configuration for novices, and it saves a lot of effort for the veteran. When you find an ideal parking place, you don't have to go back and forth, just tap the button, sit and relax, everything else can be done automatically, completely eliminating the trouble you have encountered in parking. Most of the automatic parking technology is used for in-line parking. In-line parking requires cars to be parked in parallel along the roadside, in line with other parked cars. Most car users need a parking space about 1.8 meters longer than the body to complete the in-line parking, although some skilled drivers only need less space. When the car moves to the side of the front car, the system will give the driver a signal telling him when he should stop. Then, the driver reverses the gear, releases the brakes a little, and starts to reverse. Then, the computer system on the car will take over the steering wheel. The computer turns the wheel through the power steering system and completely pours the car into the parking space. When the car falls far enough back, the system gives the driver another signal telling him that he should stop and change to the forward gear. The car moves forward and adjusts the wheels in place. Finally, the system gives the driver a signal telling him that the car has stopped. In order to park in the train, the driver must follow the following five basic steps: 1. Drive the car to the front of the parking space and park it next to the front of the car. 2. Turn the wheel to the side of the road and cut the car back into the parking space at approximately 45°. 3. When the front wheel of the car is parallel to the rear wheel of the preceding car, the driver straightens the front wheel and then continues to reverse. 4. After ensuring that the vehicle is kept at a certain distance from the rear vehicle through the rear view, the driver drives the wheel from the roadside and turns the front end of the car into the parking space. 5. Finally, the driver moves the car before and after the parking space until the car is about 0.3 meters from the roadside. Existing automatic parking vehicles are not fully automatic, but such vehicles do make it easier to park in parallel. The driver still has to step on the brake pedal to control the speed (the speed of the car is enough to drive the car into the parking space without stepping on the accelerator pedal). Then, the computer system on the car will take over the steering wheel. When driving a vehicle along a road, as long as the vehicle speed is lower than 36 km/h (the set value of each vehicle's speed will be different), the system will assume that the driver has the intention to park, and the vehicle will start to use the radar probe to automatically detect whether it is around. Have a suitable parking location. The available parking area length of the general model automatic parking system is greater than 1.2 meters above the body to confirm that the area is within the stop range. When the automatic parking system finds a suitable parking position, the reverse gear is engaged at this time, and the system will prompt the driver whether to activate the active parking assist function. After confirming the start, the driver can now leave the steering wheel with both hands, and the steering wheel will automatically rotate. To adjust the reverse direction of the vehicle, the driver only needs to control the throttle and brake to grasp the speed (when the driver holds the steering wheel, the system will pause). During the reversing process, the driver needs to properly control the speed of the vehicle and pay attention to the warning sound of the reversing radar. When the alarm is heard, it indicates that the vehicle is very close to the rear. At this time, the forward gear needs to be hung. When the car is moving forward, the system will automatically return to the wheel, and the position of the car will be squared. The screen prompt information is updated to the parking has been completed, and the neutral gear is hung to complete the parking task easily. (Small tip: After some vehicles equipped with automatic parking system are dumped into the parking space, there is no automatic returning process, and the driver needs to manually complete it by himself) Medium Voltage STA Armored Cable Medium Voltage STA Armored Cable,Underground Buried Power Cable,Steel Wire Armored Power Cable Electrical,Waterproof Copper Power Cable Wire Ruitian Cable CO.,LTD. , https://www.hbruitiancable.com
February 03, 2023